Bộ kết nối cảm biến thông minh không dây HomeScenario HSD-800Z
– HSD-800Z cho phép các cảm biến có dây truyền thống kết nối với mạng lưới sóng Z-Wave.
– Với mô-đun Z-Wave tích hợp, HSD-800Z hỗ trợ cảm biến 2 kênh.
– Liên kết với cổng điều khiển như HSC-48, thiết bị có thể được điều khiển và kích hoạt ở bất kỳ nơi đâu.
Features
– The HSD-800Z, a multi-channel universal Z-Wave sensor bridge, is a module which allows any traditional sensor with digital output to work with wireless network.
– This device utilizes the advantage for traditional sensors, which are reliable, cost-effective, and with lots of choices.
– On the other hand, it brings the flexibility of wireless connection for easy installation.
– The HSD-800Z provides up to 2-channels.
– Associated with control gateway (HSC-48), this device can be controlled anywhere and trigger scenarios.
– Supports Z-Wave 2-way mesh networking, RF range up to 30m indoors.
– Provides up to 2-channel sensor.
– Connects with any traditional sensor with digital output to enable wireless control
– With built-in EEPROM, which can log sensor historical data or acting as Z-Wave controller.
– Supports 7.5-24V wide range DC input.
– Easy to install and associate with Z-Wave host controller or Z-Wave device.
– Also acts as Z-Wave repeater for mesh network.
– Wiring instruction: Antenna (Green): avoid metal, Dl (Yellow), D2 (Blue), COM (White), V+ (Red): 7.5-24V DC, GND (Black).
Đặc tính kỹ thuật
Hardware | |
DC Input | 7.5-24V |
Digital Input | 2 (dry contact, wet contact 3.6V max) |
Power Consumption | 40mA |
RF Frequency | 865-930MHz |
Signal Coding | 9.6kbps: Manchester Encoded |
40kbps: NRZ | |
Range | Indoor: 30 meters line of sight, in unobstructed environment |
Outdoor: 60 meters line of sight | |
Dimension | 46 x 36 x 18mm |
Software | |
Input Mode | Supports two digital input mode |
Z-Wave Command C Class | COMMAND_CLASS_BASIC |
COMMAND_CLASS_MULTI_CHANNEL | |
COMMAND_CLASS_CONFIGURATION | |
COMMAND_CLASS_ASSOCIATION | |
COMMAND_CLASS_SWITCH_BINARY | |
COMMAND_CLASS_SENSOR_BINARY | |
COMMAND_CLASS_SENSOR_MULTILEVEL |
– Bảo hành: 12 tháng.
Đánh giá
Chưa có đánh giá nào.